The plumbing system in a home is more than just pipes and drains. There are many different systems that make up the plumbing, such as faucets, toilets and sinks.
These systems work together to ensure that water and waste can flow freely throughout your house. However, if something goes wrong with one of these systems or the entire system breaks down for some reason, you may need to call a local Plumber South Yarra to fix it for you.
Clogged Toilet
If you’re dealing with a clogged toilet, the first thing to do is use a plunger. Plungers are tools used to remove water from pipes and other areas of plumbing by pushing air into them. They come in various shapes, sizes, and materials–some even have bells on top that make noise when they’re in use!
To use your plunger:
- Place the rubber cup over the drain opening at the bottom of your toilet bowl (you may need to remove any hairs or paper).
- Slowly plunge up and down until all air bubbles have been removed from inside of the pipe; if no luck after 10 minutes try again later as there could be more debris blocking drain line causing the problem
Leaking Faucet
If you have a leaking faucet, the first thing to do is turn off the water supply to the faucet. Then, remove the handle and replace it with a new one. If there are washers on your faucet (they’re usually located under where you screw on your handles), check them for wear and replace as needed.
Lastly, if there is any damage to your valve seat–the part of your plumbing system that allows water from pipes into cups or pots–you’ll need to replace this too before turning back on your water supply again!
Blocked Drain
When you have a blocked drain, there are several ways to deal with it:
- Use a plunger. This is an effective method for unclogging sinks and showers. Simply place the rubber cup over the opening of your drain, then push down with all your might on top of it until water starts flowing freely again.
- Use a snake or cable auger to clear hair or other debris from drains that are too narrow for plungers or other types of rods (like toilets). It’s similar in concept to using a fishing line as an improvised fishing rod–but much sturdier and less likely to break off inside your pipes! This method works best when used after first trying various chemical cleaners first since they can sometimes be powerful enough on their own without any additional help needed from mechanical tools like these kinds here mentioned above.”
Leakage in Pipes
Leakage in pipes is a common problem that can be easily solved by a plumber. A leak in your pipes may not seem like it’s causing you any harm, but if left untreated for too long, it could lead to more serious issues. Leaks can cause mold or mildew growth on your walls and floors as well as damage the flooring underneath them. This can also lead to structural damage if left unchecked over time.
Burnt Out Water Heater
- Turn off the water supply to your home.
- Shut off power to your water heater.
- Remove the tank from its wall mount, using an adjustable wrench or other tool that fits over its fittings and can be used to turn them counterclockwise (if possible).
- Use a pipe wrench or other tool with teeth on one side and an open end on the other side (such as pliers), depending on what type of fitting you need to loosen–this will allow you access inside your tank while preventing damage to its insides. The two types of fittings are typically referred to as top/bottom connections or side connections; if yours uses tops/bottoms, loosen them first before attempting anything else!
Conclusion
We hope that this article has given you some insight into how Plumber South Yarra solves common household plumbing issues. We know that plumbing can be a very frustrating problem to deal with and it’s always nice when someone comes along to help!
